Watco Manufacturing 939290-BN QuickTrim Innovator Push Pull Trim Kit, Brushed Nickel

Product Description QUICK TRIM PUSH PULL BN From the Manufacturer Install chrome on the rough-in and easily upgrade to a special finish without removing the strainer body. Watco's Model 939290 Innovator QuickTrim kits feature a strainer body cover that is thinner than a standard strainer body (.03-Inch ) that will not create a water dam. It also produces very little additional height or inside-diameter reduction. Watco's QuickTrim kits use an o-ring for a tight, snug fit (one for brass strainer bodies and one for zinc strainer bodies). There is no need for silicone, plumber's putty, or epoxy. Using a Watco Model 939290 Innovator QuickTrim kit eliminates the possibility of cross-threading or damaging the tub when replacing the strainer body, or of the drain fitting moving out of line due to being stressed during installation (can require cutting open the sheetrock to repair). It also eliminates destroying the integrity of your test. The Model 939290 Innovator QuickTrim kit includes a Push Pull brass knob, a friction ring and post, a brass stopper, a seal (1-1/16-Inch diameter), a QuickTrim strainer body cover, a thick QuickTrim o-ring for brass bodies, a thin QuickTrim o-ring for zinc bodies, and an Innovator snap on overflow plate. The Innovator bath waste eliminates leaks caused by a loose overflow attachment. It also eliminates the need for a separate overflow test plug, dual inventory of one- and two-hole over-flow plates, and all screws. Pull knob to open the drain and push down to close it. No stopper rotation is required.

• Sturdy stainless steel looks as good as the original strainer body
• No reduction in flow rate
• Quickly and easily replace a damaged strainer body
• Designed for use on Watco's coarse-thread (1.865-Inch - 11.5) strainer bodies: brass body #01016 and zinc body #11492
• Quick trim kits do not work with PresFlo stoppers