TOPCHANCES Aluminium Etching Engraving Pen with Clip and Magnet for Glass/Ceramics/Metal Sheet Tungsten Carbide Tip Scriber

Parameter: 1. Vibration frequency: 3400 / min 2. Air consumption: 112L / min 3. Air inlet size: 1/4 " 4. Length: 180mm 5. Working pressure: 60-90psi 6. Net Weight: 0.11Kg Package Included: 1 x Set of Engraving Pen Pneumatic tools use: 1. Before injection, please use 2-3C.C. The # 60 pneumatic oil (sewing machine oil) 2. After oiling, run the machine for a few seconds freedom.: 3. General conventional air compressor, air compressor compressed air out of a gas containing a large majority within the water, and the air compressor piston compressor to bring out the oil, if not using the water separator, water and oil with gas into pneumatic tools, make wind blades stuck, tools thrown together will not open the blades move, there may not start, if they start to insufficient torque, must pay attention to inject pneumatic oil press from the rear intake port pneumatic tools can be idle for a few seconds, the torque return to normal.::

• &#12304Materail &#12305Porcelain, glass, plastic, marble, wood and other hard materials.
• &#12304High Speed Engraving&#12305 Flexible and comfortable to use for quick lettering.
• &#12304High Quality&#12305 Pen needles for the special alloy steel, good durability.
• &#12304Carving Object Hardness Requirements&#12305 Depending on the hardness of the material most up to 1mm.
• &#12304Appliance&#12305 Widely used in lettering / category marker effect on the surface of the metal.