OREGON 73JGX084G 84 Drive Link Super Guard Skip Sequence Chain, 3/8-Inch

Made for professional woodcutters using 3/8" pitch chainsaws, the Oregon 73JGX084G PowerCut Saw Chain is a 24", .058" gauge chain with 84 drive links. This chain features low-vibration full chisel cutters for top performance. Offset depth gauges keep the cutters from driving into the sidewall of the cut, resulting in a smoother cut. Blued cutters deliver high-quality protection against corrosion. The Oregon 73JGX084G PowerCut Saw Chain replaces Stihl 35RSF 84 as well as Husqvarna H48S 84. Replaces many OEM parts, including but not limited to the following: Stihl - 35RSF 84, Husqvarna - H48S 84, Husqvarna - 544 07 59-84. Fits many models, including but not limited to the following: Dolmar - 109, Dolmar - 112, Dolmar - 113, Dolmar - 116, Dolmar - 117, Dolmar - 119, Dolmar - PS-460, Dolmar - 118, Dolmar - 116si, Dolmar - PS-5105H, Dolmar - PS-540, Dolmar - PS-6000i, Dolmar - PS-6100, Dolmar - PS-6100H, Dolmar - PS-6400, Dolmar - PS-6400H, Dolmar - PS-5100S, Dolmar - PS-7300, Dolmar - PS-7300H, Dolmar - PS-7300W, Dolmar - PS-7310, Dolmar - PS-7310H, Dolmar - PS-7900, Dolmar - PS-6400W, Dolmar - PS-5100SH, Dolmar - 120, Dolmar - PS-510, Dolmar - PS-7900W, Dolmar - 114, Dolmar - PS-9010, Dolmar - PS9000, Dolmar - PS-9010FL, Efco - 156, Efco - 165, Efco - 181, Efco - 956, Efco - 962, Dolmar - PS-7900H, Efco - MT 8200, Husqvarna - 1100, Husqvarna - 160, Husqvarna - 162, Husqvarna - 181, Husqvarna - 185, Husqvarna - 2100, Husqvarna - 2101, Husqvarna - 254, Husqvarna - 254XP, Husqvarna - 257, Husqvarna - 260, Husqvarna - 261, Husqvarna - 262, Husqvarna - 262XP, Husqvarna - 266, Husqvarna - 268, Husqvarna - 272, Husqvarna - 281, Husqvarna - 285, Husqvarna - 288, Husqvarna - 288XP Lite, Husqvarna - 298, Husqvarna - 3120, Husqvarna - 3120XP, Husqvarna - 355, Husqvarna - 357, Husqvarna - 357XP, Husqvarna - 357XPG, Husqvarna - 359, Husqvarna - 359E-TECH, Husqvarna - 360, Husqvarna - 362, Husqvarna - 365, Husqvarna - 371, Husqvarna - 372, Husqvarna - 372XP.

• Recommended saw sizes 3.0-6.0 cubic-inch (50-100cc)recommended bar lengths 16"-36" (40-90cm)
• Skip sequence: 72jgx: 3/8" pitch, .050" gauge 73jgx: 3/8" pitch, .058" gauge 75jgx: 3/8" pitch, .063 gauge
• X grind-enhanced grind geometry significantly improves out-of-box sharpness with substantial speed improvement in boring and bias (undercut) modes
• Blued cutters provide superior corrosion resistance
• Warning: oregon 72, 73, and 75jgx super guard chains may be capable of kickback that could result in serious injury to the saw operator or bystanders