G10 3D Printer Build Surface Plate 235, 250, 310, 370 - Ender 3 CR10 Prusa High Temp Upgrade Semi Flexible Fiberglass Garolite Nylon PETG ABS PLA TPU PEEK PEKK ULTEM CF VAAPR (370mm x 370mm)

Best Material for 3D Print Build Plates Garolite is a composite yet semi-flexible material that is reliably strong, lightweight, and has engineering and electrical properties. Excellent Bed Adhesion As soon as the bed heats up, your prints adhere to the surface like super glue. However, once it cools down, the prints release easily like magic. Hassle-free Print Removal Prints on the G10 hold up just as well as other build plate surfaces, but you'll get the most out of it when the bed cools down below 70 degrees Celsius wherein prints release themselves effortlessly off the bed. No Warping and Curling Easy removal of prints without scarring and white spots means you decrease the chances of having do-overs, which is great for those running a business. Easy Installation Install in just 5 steps. Clean, align, clip, clean again, and start printing! How to Install the G10 3D Printer Build Plate: 1. Pour isopropyl alcohol and wipe it down with cloth. 2. Lay it on the printer, on top of the heated bed. 3. Align it with the heated bed, and clip it using small binder clips. 4. Clean it again using isopropyl alcohol and cloth. 5. Start printing. How to Remove Prints: Most prints are able to self-release, especially with the G10. But if necessary, you may use a scraper on our build plates. Don’t worry about scratches, they will not affect the function of the build plates.

• Your prints will stick wonderfully and then release completely once the plate has cooled!
• Material is semi-flexible so this surface can replace your glass bed and be removed and flexed to "pop" prints off.
• This surface requires a heated bed. It will not work well if your bed cannot heat. The exception is TPU. TPU can be printed with no heat and still sticks almost too well.
• 1.76mm Thick.
• Some plates will come with protective film. Please remove before use. It will be obvious if your plate has a film.