BLUEROCK Tools Model SL-1.5 Seam Locker Folding Tool for Pittsburgh Seams Duct HVAC

<br><br>BLUEROCK ® Tools Model SL-1.5 Seam Locker<br><br>Specifications:<br><br>* Lock Capacity: 1.25mm-1.5mm<br><br>** 18 gauge Galvanized Steel<br>** 18-16 Gauge Standard Steel<br>** (See other model SL-1.0 or SL-1.25 for thinner steel)<br><br>* Height of Flange (the metal edge to be folded over): 13-16mm ONLY (See other model SL-1.0 or SL-1.25 for smaller flange heights)<br>* Material Tensile Strength: 0.05-0.06 Inch <br>* Motor Data: 120v, 60Hz, 11.6 Amps, 1400W, Standard US Grounded Plug<br>* Machine Speed 150RPM Single Speed Gearbox<br>* Working Speed: 13-23 ft/min<br>* Inner Radius: Min 5.9"<br>* Outer Radius: Min 11.8"<br>* G. W.: 19 lbs<br>* N. W.: 12 lbs<br><br>The purpose of the SL-1.5 Seam Locker is to fold and close longitudinal Pittsburgh lock joints/seams on ductwork, e.g. ventilation ducts, housings, containers, etc. This creates a clean and uniform folded seam. This machine does not create a Pittsburgh seam, only folds the seam. The machine will automatically adjust itself for sheet thickness as long as it is within specifications. The quality of the locking seam depends on the height of flange. If flange is too large or too small, the lock seam cannot close properly. <br><br>This is a brand NEW BLUEROCK Tools Seam Locker Model SL-1.5 It comes with a plastic carrying case for protection during shipping.<br><br>* The lock seam can be closed on straight or slightly curved contours <br>* The model SL-1.5 is for locking seams 1.25-1.5mm ONLY. <br>* PLEASE CONFIRM ALL THE SEAM GAUGE &amp; MEASURED SIZE CRITERIA ABOVE BEFORE PURCHASING<br><br>FOR SHIPPING OUTSIDE OF CONTINENTAL UNITED STATES PLEASE CONTACT FOR SHIPPING QUOTATION, IF NOT OTHERWISE SPECIFIED IN ITEM DESCRIPTION.<br><br> <br><br>Operating Manual SL-1.5 Seam Locker<br><br> <br><br>