2pcs Soft Graphite Carbon Felt 200x300mm High Temperature Carbon Fiber for Cleaning Contamination Adsorption Thickness 3/5/8mm(5mm)

Soft Graphite Carbon Felt, 200 x 300 mm, High Temperature Carbon Fibre for Cleaning the Adsorption of Contamination, Thickness 3/5/8 mm Size: about 200*300mm Thickness: 3/5/8 mm Carbon content: more than 98% Water absorption rate: 2% Applicable scene: air 350°C Vacuum 1800°C Inert gas 2600°C Specific resistance: (Ω.mm2/m) Horizontal: 8.2-11.1x10 cubic Vertical: 11.8-16.8X10 cubic Features: Carbon felt in the shape of a blanket, made by pre-oxidation and carbonisation of a flat felt based on polyacrylonitrile Soft texture, light weight, little heat, good heat insulation, easy to cut, easy to use. High temperature density and high loss. Used in vacuum furnaces, induction ovens, energy storage batteries for thermal insulation, gas absorption material for experimental conductive electrodes, filtering and stain removal. Package Content: 2 pcs * Graphite Felt Note: 1. When the temperature exceeds 300°C, it should be used under vacuum or under protection of inert gas. It cannot be subjected to stress during transport and storage and must be protected from moisture. 2. Please allow 1-2 cm error due to manual measurement. Please make sure you do not mind before ordering. 3. Please understand that the color may have chromatic aberration due to the position of the picture.

• Carbon felt in the shape of a blanket, made by pre-oxidation and carbonisation of a flat felt based on polyacrylonitrile
• Soft texture, light weight, little heat, good heat insulation, easy to cut, easy to use.
• High temperature density and high loss.
• Used in vacuum furnaces, induction ovens, energy storage batteries for thermal insulation, gas absorption material for experimental conductive electrodes, filtering and stain removal.