1000W 220V Water Turbine Generator Small Hydroelectric Generator Atmospheric Water Generator Outdoor Mini Hydro Power Equipment for Remote Areas

Specification:Product name: hydroelectric generatorMaterial: Aluminum alloyCoil: In pure copper coilDiameter: 50mmThe drop of the generator needs 3-30 meters, and the drop is calculated according to the vertical height.The pipe diameter requires 50mm pipe diameter,The amount of water needs to be full.The generator needs to meet the above requirements to be fully charged, and the tube can generate 1000 watts of power when the tube falls 50 mm and 30 meters.3 meters drop can send 10-20 watts, 10 meters drop can send 100-300 watts,About 300-500 watts can be delivered when dropped from 15 meters, and about 300-500 watts can be delivered when dropped from 20 meters.500-700 watts, a drop of 30 meters can send about 700-1000 watts. is the actual test data

• 1. The amount of water needs to be filled with a 50mm water pipe through the water pipe, and the power generation varies according to the height of the drop. This is based on vertical drop, not length.
• 2. The drop of the generator needs to be 3-30 meters, and the drop is calculated according to the vertical height.
• 3. The generator material is aluminum alloy and galvanized iron, and the coil is pure copper coil.
• 4. Follow the generator's installation and operating instructions. Connect the drain hose to the water outlet of the generator. Drain as much water as possible.
• 5. The generator head should be kept dry. It is strictly forbidden to spray water on the generator head.